Bank Select
Choose from various banks such as Bassdrums, Snaredrums, FX and so on.
Patch Select
Select a sample to use from the loaded Bank
Trig Button
Auditions the sample chosen
Pitch
Changes the playback speed of the sample.

Volume
Drumpad volume
Panning
Drumpad panning

Module: CK_Pan : "Chris Kerry"

Amp Env On/Off/Itch
Turns amplitude envelope on/off/itch. In off mode sampleplayback is stopped on note off.
Amp Attack
Envelope Attack.
Amp Release
Envelope Release.
Itch
Envelope timer, ranging from 0-100ms. For making short constantly timed noise bursts. Acts as gate signal on the Amp Envelope, meaning a attack and release are still in use in itch mode.

Mod LFO
Sinewave LFO rate

Mod Envelope
ADSR envelope for modulation with bypass switch for resource saving.

Random Generator
Dual gate trigged random generator with routing and adjustable amount. Each generator randomizes a number independantly on gate signal which is then used for modulation.

Module: LP-Rnd "Lance Putnam"

Modulation Routing
The arrow in the upper left corner inverses the modulation signal. The switch reroutes it and the knob controls the amount.

Bitrate
Controls bitrate from 0-16bits
Samplerate
Controls samplerate from 0-44.1KHz

Module: LP-BitCrush "Lance Putnam"

Distortion Waveshape
Selects from 4 different waveshapes
Distortion
Amount of distortion

Filter Mode
Selects from 4 different filter modes. Lowpass, Highpass, Bandpass and Bandreject.
Cutoff
Filter cutoff in Hz
Q
Filter resonance

Note Select
Selects which note number each individual pad will respond to. Note that it is possible to have several pads responding to the same note.

MIDI Learn
Inactivate for now